Tunes for SideKick/Agility Fuel Controller for Polaris AXYS 850
Regular price $0.00
Unit price per
Tunes are developed by BoonDocker for the best-running, race-winning fun and performance. Easily update your tune file by selecting your tune and loading it on your device!
Summary
This is where you can download the tune files for your BoonDocker SideKick 1.0 or SideKick 2.0 fuel controller with USB Update port.
Quickly change your tune from pump gas to av gas, power levels and more!
NOTE: tunes have individual README files that show the correct settings for that specific tune which may include any of the following: Wastegate Actutator type, Wastegate Actuator pre-load tension, Fuel Type, OEM ECU Flash (if applicable), OEM Fuel Mode, Clutching requirements & recommendations
You MUST have an account on our website to download tunes!
Fit and Compatibility
- 2019+ Polaris AXYS 850 (Patriot) ✔
- These tunes fit BOTH SideKick AND Agility BoonDocker fuel controller with USB Update.
- It is YOUR RESPONSIBILITY to confirm fit
- It is YOUR RESPONSIBILITY to properly configure your snowmobile and/or fuel
- Different snowmobiles use different electronics. Electronics are NOT interchangeable
- Tunes may be loaded onto the "wrong" electronics (ie, an 850 tune can be loaded onto an 800 box). This will permanently damage your electronics. Please verify fit and file name.
Revision Number Key
| Rev # | Tune |
|---|---|
| 1 | 91-octane w/10% Ethanol |
| 2 | 20% Av, 80% 91-octane |
| 3 | 91 Octane (no ethanol) |
| 4 | 100 LL Straight Av |
| 5 | 50 % Av, 50% 91-octane |
01 - Tune Chart: 91-Octane w/10% Ethanol
Tunes for 10% Ethanol have been discontinued. If you ONLY have access to 10% ethanol fuel, please use 91-octane tunes (tune revisions that start with a "3"), and switch your sled into Ethanol/Non-Premium Mode using the Polaris gauge. ALL ETHANOL TUNES ARE NOT TO BE USED WITH AGILITY. PERMANENT ENGINE/TURBO KIT DAMAGE WILL OCCUR
| Revision | Package Name | Release Date | Status | Actuator Type | Sled Fuel Mode | Waste Gate Crack Pressure |
|---|---|---|---|---|---|---|
| 1.02 | 91Et_BD_S2_PRM850_r02-02 | 14-Mar-19 | Archive | Blue | Eth | 5.00 |
| 1.01 | 91Et_BD_S2_PRM850_r02-01 | 14-Feb-19 | Archive | Blue | Eth | 5.00 |
03 - Tune Chart: 91-Octane non-ethanol
| Revision | Package Name | Release Date | Status | Actuator Type | Sled Fuel Mode | Waste Gate Crack Pressure |
|---|---|---|---|---|---|---|
| 3.02 | 91NE_BD_S3_PRM850_r03-02 | 20-Dec-19 | Current | Blue | NonEth | 5.50 |
| 3.01 | 91NE_BD_S3_PRM850_r03-01 | 20-Dec-19 | Archive | Blue | NonEth | 5.00 |
04 - Tune Chart: Av-Gas (100LL)
| Revision | Package Name | Notes | Release Date | Status | Actuator Type | Sled Fuel Mode | Waste Gate Crack Pressure |
|---|---|---|---|---|---|---|---|
| 4.08 | 100LL_BD_S3_PRM850_r04-08 | Same as 4.07 with more fuel on chop | 01-Feb-21 | Current | Black | NonEth | 7.00 |
| 4.07 | 100LL_BD_S3_PRM850_r04-03 | 20-Dec-19 | Current | Black | NonEth | 7.00 | |
| 4.06 | 100LL_BD_S3_PRM850_r04-02 | 20-Dec-19 | Archive | Black | NonEth | 7.00 | |
| 4.05 | 100LL_BD_S3_PRM850_r04-01 | 20-Dec-19 | Archive | Black | NonEth | 5.00 | |
| 4.04 | 100LL_BD_S2_PRM850_r02-03 | 27-Mar-19 | Archive | Black | NonEth | 7.00 | |
| 4.03 | 100LL_BD_S2_PRM850_r01-03 | 02-Jan-19 | Archive | Black | NonEth | 7.00 | |
| 4.02 | 100LL_BD_S2_PRM850_r01-02 | 02-Jan-19 | Archive | Black | NonEth | 7.00 | |
| 4.01 | 100LL_BD_S2_PRM850_r01-01 | 02-Jan-19 | Archive | Black | NonEth | 7.00 |
05 - Mix 50% 91-Octane, 50% Av-Gas (100LL)
| Revision | Package Name | Release Date | Status | Actuator Type | Sled Fuel Mode | Waste Gate Crack Pressure |
|---|---|---|---|---|---|---|
| 5.06 | 5050_BD_S3_PRM850_r05-02 | 20-Dec-19 | Current | Blue | NonEth | 6.50 |
| 5.05 | 5050_BD_S3_PRM850_r05-01 | 20-Dec-19 | Archive | Black | NonEth | 6.50 |
| 5.04 | 5050_VO_S2_PRM850_r01-01 | 18-Dec-18 | Archive | Ultra Low | NonEth | 6.00 |
| 5.03 | 5050_BD_S2_PRM850_r01-03 | 02-Jan-19 | Archive | Ultra Low | NonEth | 6.00 |
| 5.02 | 5050_BD_S2_PRM850_r01-02 | 26-Dec-18 | Archive | Ultra Low | NonEth | 4.80 |
| 5.01 | 5050_BD_S2_PRM850_r01-01 | 01-Dec-18 | Archive | Ultra Low | NonEth | 4.80 |
Download Drivers
BOTH Drivers are required. Please make sure to download them both to update your control box
Instructions
NOTE: The instructions provided use a Polaris 850 as the example. Please be aware that ALL control boxes use the same instructions. They also use the same program, which is named Polaris850_Updater. Don't be alarmed, go ahead and continue through the instructions, which are the same for all makes and models.
ALSO: Some control boxes/computer/tunes require you to disconnect your control box in the middle of the update process. If this happens to you, please follow the instructions. Disconnect the box as requested, but don't forget to disconnect the battery. Then, when prompted, connect the control box THEN connect the battery.
Frequently Asked Questions
How do I need to configure my kit for different scenarios?
- Determine the appropriate file to download
- Register for an account to receive your tune
- Select your tune from the list and add-to-cart
- Checkout using our website and then choose to download your digital product
- Use the instructions to install tune files
- Review the README file and appropriately configure your sled
How long does it take to install?
A qualified technician should be able to install this product as follows:
- 5 minutes
- The first tune-installation will likely take an hour to get the drivers installed, etc
Can BoonDocker install this product?
Absolutely! We have a fully-staffed service department. We know our products best, and can go beyond a simple installation with our Built by BoonDocker™. Know that your vehicle is ready for the weekend. We also have a strong dealer network across the nation. Our premiere dealers have demonstrated the knowledge of our products and sell enough volume to be competent in both installation and service.
Where are the installation instructions?
The installation instructions are provided below. Please click on the image to download the PDF. We suggest you browse the instructions before you determine if you want to install this product yourself or if you want a dealer to install.
How do I get my tune(s) for my BoonDocker Control Box?
We provide tunes for download: downloads.boondocker.com
Does BoonDocker offer an ECU Re-flash option?
Yes, we offer ECU re-flash options (coming soon).
Why does BoonDocker use a piggyback fuel controller?
We utilize a piggyback-style fuel controller for several reasons. Primarily, to electronically control boost. BoonDocker is the ONLY kit on the market that uses active electronic boost control, meaning your sled will work, regardless of conditions.
Can I install this product myself?
This product requires a basic skill level to install. A computer-inclined person can easily tackle this project. We suggest that you look at the instructions and determine if you need assistance from our service department or one of our dealers.
Are any specialty tools required?
You will need a 9v battery, BD Battery Jumper, and USB-data-cable. Your USB cable MUST be a data-cable, not just a charging cable.
Do you have an E85 tune
No, we don't produce E-85 tunes.
MADE IN THE USA
Hand crafted products built in Idaho