Agility Vent Kit for Polaris
Regular price $169.00
Unit price per
The Agility Vent Kit for Polaris is the answer to frozen vents, baro-sensor trouble-codes, and poor performance on all Polaris AXYS snowmobiles (even naturally aspirated). The Polaris-OEM factory vents do not perform to our standards. They easily saturate with water and in most winter conditions, will freeze and prevent proper airflow, even on a stocker.
Maximum performance comes from both a larger intake surface area and from using high-grade materials. Increasing the surface area allows for proper airflow in the most demanding conditions.
We start off with FrogSkinz-branded pre-filter material, which we have custom-cut for us at the factory. This material is the benchmark in hydrophobic pre-filter material. They simply won't absorb water.
The frame is constructed of aluminum for the ultimate lightweight performance part. The vents fasten to the snowmobile with four self-tapping screws, and can easily be installed in the trailer.
Installation is easy, with no drilling or cutting required! Simply install the four self-tapping plastic screws (per side) and you're ready to ride!This is the best vent kit for Polaris on the market.
Fit and Compatibility
- 2016+ Polaris AXYS 800 ✔
- 2016+ Polaris AXYS 600 ✔
- 2019+ Polaris AXYS 850 ✔
This kit DOES NOT fit 2015 and prior "Pro" chassis. This kit has not yet been tested for fit on the Matrix chassis.
- Available as a complete kit, or as just replacement filters
- Kit Includes:
- Complete vents (both sides)
- Does NOT include spare pre-filter material
Stats and Specs
- Frogskinz branded prefilter membrane (hydrophobic)
- Aluminum (lightweight) construction
- Self-tapping hardware (phillips-head)
- Replaceable pre-filter membrane
- Updated for 2021 with improved sealing surface to prevent snow-dust from entering vent cavity
- Not applicable
Click the link next to ANY upgrade to learn more or buy now
- We STRONGLY suggest our BoonDocker High Energy ™ clutching.
Frequently Asked Questions
How can I order replacement pre-filters?
Is it common for the pre-filter to rip or tear?
Should I keep the stock filter installed?
The vents were designed to keep the stock filter installed. However, if you remove the stock vents, we suggest you keep them with the snowmobile in case you rip or tear your Agility vents during a ride.
What should I do if I rip or tear the vents during a ride?
Do not allow snow/water/debris to enter the intake system. If debris enters your intake, you risk damaging your motor or turbo. We suggest keeping your OEM vents installed. If you remove your OEM vents underneath the BoonDocker vents, we suggest that you keep your OEM vents on-hand so you can easily install them if you have an issue.
Do I need to Cut or Modify any plastics?
No, our vents fit over the top of the OEM vents.
Do the Agility Vents fit overtop of the SLP vents?
Do the Agiltiy Vents work with the Polaris-brand Dash Bag?
While this setup "will work", the vents will rub on the Polaris dash, and eventually wear through the Agility Vent material.
(click image for instructions)
MADE IN THE USA
Hand crafted products built in Idaho